ARM-clip® is designed for use as a cap on a metal anchors of a periodic profile for fixing geocells on a slope.
ARM-clip® is made from a specially developed composition based on polyethylene. This gives the product high elasticity and excellent shockproof properties.
Thanks to the new production technology ARM-clip®:
does not burst when placed on the anchor
withstands numerous hammer blows
retains elasticity at low temperatures
The ARM-clip® is available in two sizes for anchors of Ø10 mm and Ø12 mm.
Significant savings on logistics when the production of metal anchors is in the immediate vicinity of the construction site
Savings on the cost of anchors from 5% (for rebars with a diameter of 12 mm)
High elasticity and impact strength
Resistance to low temperatures
Resistance to aggressive environments
Resistance to microorganisms
Environmentally friendly material, does not emit harmful substances into the environment
Fast and easy to mount on anchors
It can be applied in any climatic conditions
Allows to establish the production of anchors at the construction site
Reliably fixes a geocell on a slope
Presses geocells to the base as much as possible
Does not change cell geometry
Does not slide off the reinforcing bar
Service life of more than 40 years
ARM-clip® allows you to do without ready-made metal anchors for geocells. Instead, you can set up a production of anchors directly at the construction site, using rebars together with ARM-clip®. This will significantly reduce logistics costs.
The plastic clip of the ARM-clip® makes it easy to connect adjacent geocells during installation, as well as reliably fix the geocell on the slope, pressing the cells to the base as much as possible.
Antirotation panes inside the hole allow to securely fix the ARM-clip® on the anchor, preventing slipping.
Strengthening slopes with GEOSTEP® and ARM-clip™ on s highway in Moscow
Our experts will make a calculation taking into account the individual features of your project. Call us at +74996733733, send an email at email@example.com or leave a request!